Link Ethanol Content Sensor
Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle.
A Flex Fuel Sensor measures the ethanol content in the car's fuel system. The sensor is installed between the fuel pressure regulator and the fuel tank, it monitors the ethanol content of the fuel returning to the tank. This information is sent to the ECU for analysis where the ignition timing, boost levels, fuel tables are adjusted to current Ethanol content.
Perfect add on for any Link G4+ or G4X ECU.
This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the ECU. The sensor is fitted to the vehicle’s fuel return line anywhere between the fuel pressure regulator and the fuel tank.
- AN-6 Fittings
- Includes plug and pin kit
Technical Specs
The pinout is indicated on the sensor itself (from left to right looking into connector on sensor) as :
1.) Vcc (+12V supply)
2.) GND (ground)
3.) Vout (digital signal out)
Radium Engineerings Split Flow Flex Fuel Adapter can be found here
