NISSAN SPECIFIC FEATURES:
COBB Adjustable Traction Control: Adjust target traction slip on the fly (Slots 1-8) and maximize tire grip to best suit given track conditions (wet/damp/dry/street/slip/burnout/etc). Note: Feature must be enabled in ECU calibration for use.
COBB Adjustable Launch Control: Adjust the factory launch control RPM to maximize the tire to pavement contact for that perfect launch. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008
COBB Boost Gauge wrap around: Monitor boost past 20 PSI (~150 kPa), which is an OEM limitation on the factory Multi-Function Display. The boost gauge will wrap around and display excess boost pressure.
COBB Boost Off The Line: Dial in boost to optimize launches beyond the factory Launch Control logic. Boost Off The Line builds boost to spool the turbos for that perfect launch. Note: Feature must be enabled in ECU calibration for use.
COBB Knock Indicator: View knock events, as they occur, on the factory Multi-Function display.
COBB On The Fly Map Switching: Switch to another map on-the-fly while you drive for optimal tuning for every situation.
COBB Realtime Tuning: Changes can be made to the map in realtime, while the engine is running. Greatly speeds up the tuning process and allows quick changes to powerful features like Adjustable Traction Control, Launch Control and Map Switching.
COBB Rolling Boost: Load up the turbos to create boost for roll race events. Simply hold the cruise control button, “Set Coast” to build boost. Note: Feature must be enabled in ECU calibration for use.
COBB Speed Density Tuning: Tune using the MAP sensor instead of the MAF sensor for big-power builds that exceed the stock MAF sensor's maximum capacity.
COBB Fast ECU Flashing: Allows ECU map change flashing time to be reduced to 40 seconds or less!
TCM Flashing: Reflash the Transmission Control Module to enhance launch control, perform factory gear learning, and adjust clutch capacity and touch points. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008
TCM Adjustments: Run clutch gear learning, or adjust clutch touch points, and clutch torque capacities. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008.
TCM Logging: Log transmission data monitors to diagnose mechanical issues or improve transmission characteristics. Transmission monitors can be logged simultaneously along with Engine monitors. Note: Feature is only available on AP3-NIS-006 and AP3-NIS-008
TPMS Learning: Easily re-program TPMS sensors for new wheels and tires using the Accessport and prevent cumbersome trips to the dealership!* (*requires common Tire Pressure Positioning Sensor Tool).
Bank Air Learn: Relearn and rebalance airflow between the left and right intake manifolds.
